|
DM510 Dryer Master®
The DM510 Dryer Master® is ideal for drying grains like corn, soya beans and wheat. There is a specifically configured DM510 solution for rice drying where product temperature is the key variable. There is also a DM510 Dryer Master® solution specifically configured for front end conditioning of soya beans, sunflower seeds and canola (rapeseed). Up to 8 product setups and sensor calibrations supported.
A new feature enables the DM510 to communicate with a Windows PC running a special Dryer Master® client application either within your facilities network or over the internet. This permits true monitoring and remote control of the Dryer Master®. Most settings available on the Dryer Master® panel are available remotely.
The Dryer Master® DM510 is the premier control system using long time industry proven; Generic Model based Control strategy (GMC). Stainless steel constructed moisture sensors provide a long service life and are easy to calibrate against a bench top tester.
Moisture control is achieved by optimizing the products residence time. The system tracks inlet moisture, drying temperature, and outlet moisture and discharge rate to determine the optimum dryer speed to bring as much product close to target as possible.
The system will interface with the most modern Variable Frequency Drives directly and usually only requires a small isolation interface to operate non isolated SCR type DC drive controllers.
The system provides printed records of operation as well as stores data to a memory module for retrieval to a computer using the terminal communication port.
Features:
-
Set up for 8 Products;
-
Corn
-
Beans
-
Wheat
-
Canola
-
Corn/Hot/Other
-
Bean/Other
-
Sunflower/Other
-
Rice/Other
* Customizing Available
-
Record Keeping
-
Total Remote Control Functions
* Direct connection to Windows PC. Able to be networked for remote control over the internet.
-
Remote Support
* Using Telephone modem or dedicated internet connection year end summary reports, drying analysis, system setup, and help can be provided.
Specifications:
Operating Range, DM510 Control Unit:
-
Temperature, 0C to + 50 C, 32F to +125F
-
Relative humidity, 5% to 95% non condensing
-
Nema 2
Operating Range, Moisture Sensor:
-
Temperature, -25C to +60C, -13F to 140F
-
Relative humidity, 5% to 95% non condensing
-
Nema 4, Explosion Proof and intrinsically safe models available
-
Moisture Range, 0.25% to 45%, product dependent
-
Product temperature range -20C to +90C, -4F to +195F
Power Requirements:
-
100 to 250 Volts AC 25 VA for DM510 Control Unit
-
20 to 30 Volts DC20mA for the moisture sensors
-
The moisture sensors are powered by the DM510 Control Unit
-
One 4 wire instrument cable connects each moisture sensor to the DM510 Control Unit
Communication
-
RS232 Port for Serial Printer
-
RS232 Terminal Port for Remote Communication
-
0-10 VDC, 0-20mA Output to Speed Controller
-
Remote Alarm Output to Speed Controller
-
Remote Alarm Output, 24 VDC 200 mA
-
Calibration in Progress, 24 VDC 200 mA
-
Local Remote Control Output 24 VDC 200 mA
|
|
